How to install the built-in shutter insulating gla

2022-09-30
  • Detail

How to install the built-in shutter insulating glass

the built-in shutter of insulating glass is the built-in aluminum shutter in the double-layer tempered glass to control the light entering the room, which not only retains the beautiful and practical characteristics of the shutter, but also overcomes the shortcomings of cleaning trouble. It has gradually become the most basic configuration of general residential buildings, but also the most important factor affecting lighting, ventilation and comfort. Then, how to install the built-in shutter insulating glass

how to install the shutter

measure the size of the outer frame: the width of the outer frame of the window is measured from left to right. The widest size of the upper, middle and lower windows is the suitable width of the outer frame. Height measure the height of the window frame from top to bottom. The largest size of the window on the left, middle and right will also greatly increase the export share of emerging countries, that is, the suitable height of the frame

measure the size of the inner frame: measure the width from left to right. The domestic mine of the inner frame of the window may have a firm width. The size of the minimum width of the upper, middle and lower windows is further reduced by 1cm, which is the suitable width of the inner frame. Height measure the height of the inner frame of the window from top to bottom. The size of the minimum height of the left, middle and right of the window is the suitable height of the outer frame. Make sure that the window depth is sufficient for the free movement of the shutter blades, and different shutter installation methods require different window depths. 8cm depth is required for fixed or open installation. During push-pull installation, in addition to considering the blade width of the product, the number of layers of the installed product should also be considered. Generally, the two-layer push-pull needs to ensure that the blade movement needs 15cm depth, and the single leaf needs 10cm depth; 10cm depth shall be reserved for folding installation

Pacxpert packaging can stand steadily

installation method: fixed method if the shutter is fixed, it will bring inconvenience to clean the window glass. Generally, fixed installation is not selected. The flat opening mode has the characteristics of good sealing, which is suitable for the installation of small windows or single or two windows. The push-pull method takes up less space and is suitable for the installation of general windows. The folding mode is suitable for the opening mode of multiple windows, which is generally used when making partition or floor to ceiling windows

precautions for installation of louvers

if the louvers are installed in a fixed way, it will bring inconvenience to clean the window glass. Generally, fixed installation is not selected. The flat opening mode has the characteristics of good sealing, which is suitable for the installation of small windows or single or two windows. The push-pull method takes up less space and is suitable for the installation of general windows. The folding mode is suitable for the opening mode of multiple windows. Generally, the internal frame is used for partition or floor to ceiling windows

Copyright © 2011 JIN SHI